roundHouse / 2007-01-03

Overall view as you step off the bridge.	Outside view as you come up on it from creek.	Looking almost directly west. Door will be at the...	The structure so far. Center post is 12 feet 2 inches...	Inside looking at the new wall. Pine logs standing on end...
Inside view looking back toward the creek.	Center pole with rafter and brace. Boards around it are...	Temperary bracing from the rafter to the headers. Just...	Braces are just screwed into place. I am drilling a 1/4...	Door post top showing header cut out. I am leaving a 2.5...
Northmost post showing header cutout and support bracing.	Chalk line being used as a plumb bob. 3 inch rock screw...	Close up of the first rafter, pole, header joint. 3 6...	This is all the foundation I am using. May pour some...	4 layers of plastic under the post. Hope this is enough....
Stool I made out of a piece of pine tree. Screws in the...	Shaving horse with firepit in background.	Another view of the shaving horse. Started out with 3...	End view of the shaving horse with a stool in the...	Hole tapering bit I made. Drill a hole from 1 inch up...
View of the taper bit from the other side of the blade. ...	Shaving horse top view. Pin at right end keeps the board...	Shaving horse holddown pivot. Locking pin is a piece of...

23 Images  |  Technoprimitive.org  |  Weaver Combat Ranch  |  Generated by JAlbum 6.5 & Chameleon skin  |  Help

This page, all images, and content Copyright © 2006-2007 By David E. Patty All Rights Reserved