Posts tagged: tweet

Got one of the mortises drilled and chiseled out. Had to come in and take a break. Haven’t sweated like this in a while.

By , May 17, 2013 9:13 pm

Started peeling the ridge pole. Starting length is about 16 feet, of which 12 will be under canvas. The 2 uprights are 8 feet long.

By , May 17, 2013 9:12 pm

Got off of my arse and went shopping for wood in the cedar thicket. Think I got enough for the basic tent frame and front poles. Cost=sweat.

By , May 17, 2013 9:11 pm

Got nothing much done yesterday. Wanting to do nothing but go back to bed today and may do so soon.

By , May 17, 2013 3:08 pm

Going to try to get the inside panelling put in place in the camper tomorrow. And then another coat of paint on the outside.

By , May 16, 2013 3:46 am

Gonna add more and put down gravel on top of it to control the unwanted grass and weeds. Just ran out of steam to do that today too.

By , May 16, 2013 3:40 am

Hopefully done in Calcis for the near future. Got weeds cut back somewhat around the trailer. Put down weed control mat under the ramp.

By , May 16, 2013 3:38 am

How Glyphosate Worsens Modern Diseases http://t.co/oqox1FKLFO

By , May 15, 2013 1:45 pm

Photo: http://t.co/gYoFpLx74z

By , May 14, 2013 2:34 am

Photo: Built one last week by trial and error to use drilling deer antler buttons. Gonna have to build… http://t.co/XhKEGmRzOE

By , May 14, 2013 2:33 am

Photo: preppinggirl: It may pay to know your knots. Handy list of knots! http://t.co/CoY0Or0Tuy

By , May 14, 2013 2:31 am

RT @seriouseats: The Burger Lab: A 60-day dry-aged home-ground prime rib burger (that you will probably never make at home): http://t.co/xwhrWBrrlu

By , May 14, 2013 1:17 am

RT @YourAnonNews: “Journalism is printing what someone else does not want printed. Everything else is public relations.” – George Orwell

By , May 10, 2013 2:42 pm

MAPCO warns of payment card security breach | http://t.co/nlxhsSm9UG http://t.co/FY7xrGark2

By , May 9, 2013 11:55 pm

The Othermill: Custom Circuits at Your Fingertips by Otherfab — Kickstarter http://t.co/r5atUOown3 Wish I had a extra grand or so!

By , May 9, 2013 11:51 pm

“They deem me mad because I will not sell my days for gold; and I deem them mad because they think my…” http://t.co/aCK0hFhq4b

By , May 9, 2013 2:38 pm

First coat of paint on them now. Total cost is approaching $3. One 50 cent dowel and 2 – 99 cent cans of black spray paint.

By , May 8, 2013 10:56 pm

Will have to see how they stand up in the wind. May have to add a weight to or on the end of the dowel.

By , May 8, 2013 10:54 pm

Got 3 necklace display stands made. look like a fat necked/handled cutting board with a 7″ to 8″ dowel about 3 inches from the back/bottom.

By , May 8, 2013 10:53 pm

Grinding a matching taper on the end of the dowels and they have a good friction fit with just a slight twist. Come back apart the same way.

By , May 8, 2013 9:24 pm

Panorama Theme by Themocracy