Gonna have to go out and measure some more and see what can be done without totally blocking the parking area.
Comments (0) Comments (0) 
And that will clear off the area in the back to be able to stack stuff on to clear off even more in back to start building back there too…
By , January 2, 2013 11:23 pm
Thinking about moving the 10×20 to the front to use to house tools to build the shed to house the tools to rebuild the inside of the Q-hut.
By , January 2, 2013 11:22 pm
Still got to cut a wedge and drive it in but tis closer to getting to cut wood than it’s been for many years… ;-)
By , January 2, 2013 11:20 pm
More stuff cleaned up out front. Axe head put on handle. Head has been hanging in the barn waiting for a new handle for 20 + years.
By , January 2, 2013 11:20 pm
That Link You Just Posted Could Cost You 300 Euros – Slashdot http://t.co/u6Mko1KN
By , January 2, 2013 10:01 pm
Tis also quite cold out there. Much more so than it was earlier today.
By , January 2, 2013 9:56 pm
Had to come in for a break. Still weak from the bug/flu we have had and not able to do much at a time. Slowly, slowly eats the elephant…
By , January 2, 2013 9:56 pm
Found a pile of marble I had forgotten about having. :-( Got most of it out of the vines and briers and stacked against the building.
By , January 2, 2013 9:55 pm
Second blow with the swingblade broke (finished breaking) the handle out. Found the bush axe and am using it instead.
By , January 2, 2013 9:54 pm
Started the clearing. Moved the tractor around with the forklift/hauler on it to load the junk, briers and brush on.
By , January 2, 2013 9:53 pm
Don’t remember how long they are. Think they were 23′ with 6′ cut off but not sure. Length will also determine the orientation of the slope.
By , January 2, 2013 8:40 pm
Got to go look at the metal roofing and see how many of the shorter sheets I have to determine how wide and long the front shed will be.
By , January 2, 2013 8:38 pm
Decided that the first step is to clear the area in front of the Q-hut and build an extension to do the building/work under.
By , January 2, 2013 8:31 pm
Going to try to get inside walls and insulation in the Q-hut prior to moving any more equipment in there. Should be an fun/exciting project.
By , January 2, 2013 7:26 pm
Now have to clear things out of the front of the Q-hut to get started. Tis gonna be another one of the sequential vortexes I suspect…
By , January 2, 2013 7:24 pm
Need to move the stuff out of the barn so I can start the tear down. Measured the Bridgeport milling machine & it’ll fit in the Q-hut. :-)
By , January 2, 2013 7:23 pm
Themocracy