Comments (0)

By Dave, November 4, 2011 10:54 pm

Going to fix more coffee and see what I can figure out for supper, so till later folks…

Really want to get the remaining side done tonight but tis not looking like the bod is up to it. Have run completely out of energy.

Trimmed the protruding ends of the boards on the side I have almost completed. Only a few more bits to install and then can insulate.

Got the screws and a plastic 10 mil tarp. Forgot to get the foam glue. 🙁 Got the remaining back corner post up and 2 side boards on.

Also added 2 more supports underneath in the front so it’s not sitting on 2 in back and the tongue. Is much more stable now. 🙂

Found one jack stand (were supposed to be at least 3 but the others seem to have wandered off) and used it to level the camper.

Think the coffee is ready. Time for another cup and then back to the sawdust…

Gonna get a plastic tarp to use for the top to waterproof it till I have time to get the canvas on and painted with 3+ coats of exterior.

Kinda reminds me of the time I built the second floor and then built the outside supporting wall to fit the floor. 😉

Gonna start the other side wall and then set the door frame in back to stablize it or I is hoping it will.

Kinda sorta figured out the arc for the top. Got all the inside boards on one side wall put in. Things are getting a bit wobbly in back.

Still have several to put on the front but want to get the sides up to see what the top arc is actually going to be. 6 days to road trip…

Getting closer with the camper. One more board to go on one side then get to start on the other. Sides are going lots faster than the front.