Comments (0)

By Dave, March 14, 2012 2:37 am

The 10’L measurement will be form the dash back so will only have 8′ usable length. Should be an interesting build.

Leaving the firewall and dash (or some of it anyway) & drive train. Going for standing room in part of the area. Sleep 2. 10’Lx6.5’Wx6.5’H.

All the body that will be left is hood and fenders. Cuting the cab off at the windshield and build everything from there back

Done a bit of measuring and figuring and I’ve about got the mods I want to make to the old Toyota flatbed figured out.

Got it in a much better location to start taking it apart. Gonna use parts of it to finish the Vardo and other bits to make a Toyota camper.

After mowing, removed the bush hog and put the draw bar on. Took the tractor down to the camper I’m starting demolition on and moved it.

Cleared around them so I’ll get back in there later and drag them out. They range from 10 to 14 feet long and looks to be 30 + of them.

Did more mowing in the junk yard and got a lot of stuff exposed to drag out and haul off. Found a bunch of shelving uprights I had lost.

I cut the area cleaned up and then we got to taking the building down. Got it most of the way down and will need power tools to finish.

Did some other clearing and cleaning up too. A friend was over and cleaned up a bunch of crap left over from the air soft days.

Cut an area 6 to 8 feet deep and over a hundred feet long. Will get the scrape blade back on soon and see what roots I can get out.

Took the rotovator off the tractor & attached the bush hog. cyrtt some grass in the garden, then attacked the out of control privet hedge.

Got the clocks at Valley wound and reset for DST. Only a couple of days late. Took a bunch of screws out of some lumber I’m recycling again.