Still got to cut a wedge and drive it in but tis closer to getting to cut wood than it’s been for many years… ;-)
Comments (0) Comments (0) 
More stuff cleaned up out front. Axe head put on handle. Head has been hanging in the barn waiting for a new handle for 20 + years.
By , January 2, 2013 11:20 pm
That Link You Just Posted Could Cost You 300 Euros – Slashdot http://t.co/u6Mko1KN
By , January 2, 2013 10:01 pm
Tis also quite cold out there. Much more so than it was earlier today.
By , January 2, 2013 9:56 pm
Had to come in for a break. Still weak from the bug/flu we have had and not able to do much at a time. Slowly, slowly eats the elephant…
By , January 2, 2013 9:56 pm
Found a pile of marble I had forgotten about having. :-( Got most of it out of the vines and briers and stacked against the building.
By , January 2, 2013 9:55 pm
Second blow with the swingblade broke (finished breaking) the handle out. Found the bush axe and am using it instead.
By , January 2, 2013 9:54 pm
Started the clearing. Moved the tractor around with the forklift/hauler on it to load the junk, briers and brush on.
By , January 2, 2013 9:53 pm
Don’t remember how long they are. Think they were 23′ with 6′ cut off but not sure. Length will also determine the orientation of the slope.
By , January 2, 2013 8:40 pm
Got to go look at the metal roofing and see how many of the shorter sheets I have to determine how wide and long the front shed will be.
By , January 2, 2013 8:38 pm
Decided that the first step is to clear the area in front of the Q-hut and build an extension to do the building/work under.
By , January 2, 2013 8:31 pm
Going to try to get inside walls and insulation in the Q-hut prior to moving any more equipment in there. Should be an fun/exciting project.
By , January 2, 2013 7:26 pm
Now have to clear things out of the front of the Q-hut to get started. Tis gonna be another one of the sequential vortexes I suspect…
By , January 2, 2013 7:24 pm
Need to move the stuff out of the barn so I can start the tear down. Measured the Bridgeport milling machine & it’ll fit in the Q-hut. :-)
By , January 2, 2013 7:23 pm
Themocracy